Stand Alone Access Controller -HID Prox Card Reader & Keypad Controller – Single or Double Doors – Waterproof IP68

DAC-KP002The Stand Alone Access Controller – HID Prox Card Reader & Keypad Controller  is made with 2 relays for controlling up to to 2 doors   It is suitable for mounting either indoor or outdoor environments. It is housed in a strong, sturdy and vandal proof Zinc Alloy with an internal tamper alarm.  This outdoor / indoor waterprooof keypad is built with ease of installation and ease of use in mind. Using a HID proximity card or pin code or a combination of both for access. Fully programmable for up to 2000 users. It can control the Lock , a Security Alarm, Door Bell Alarm, and also can connect with Exit Buttons and Door Contacts.There are 7 working modes:Wiegand Reader.Standalone for single door.Standalone for two doors.With external reader for two doors.Two units interlocked for two doors.Anti-passback for single door.Anti-passback for two door.One Master codeHID Prox Cards may be purchased separately Specifications:ApplicationOutdoor / Indoor Input VoltageAC/DC 12VUser Capacity2000 usersCan be controlled by Prox Card, PIN Code or Combination of Prox Card and PINProgrammableEasily programmable at the lockTamper AlarmBuilt in light dependent resistor (LDR) for anti tamperAlarmBuilt in buzzerKeyboardback-lit for night accessibility , the back light can be set to Normal ON, Normal OFF orHuman-Approach ON.Card Reading Distance3-6 cmIdle Current<25mALock Output Load<1AAlarm Output Load<1ARing bell load<1ACard reading distance 40mm MaxCard Frequency: 125KHz for EM and HID (Not Included)Card transmission format 26-37 bit wiegandKeypad transmission format4bit, 8bit and Virtual card numberCard typeEM and HID Enclosure materialStrong Zinc Alloy Electroplated anti-vandal caseOperating Temperature-49°~131° F ( -45°C～55° C)Operating Humidity10%～95% non-condensingEnvironmentConforms to IP68 Waterproof Standards  DownloadsComplete Installation, Wiring and Programming Instructions