JET Tools HVBS712V, 7″ x 12″ Variable Speed Horizontal/Vertical Bandsaw
The JET HVBS-712V is a variable-speed horizontal/vertical metalworking bandsaw powered by a 3-step gear DC motor for high torque across its blade-speed range. A multi-position blade guide expands throat capacity in the vertical position, and speed changes are made by turning a knob rather than swapping belts.
Features
- Adjustable Hydraulic Feed System.
- Adjustable Tooless Material Stop.
- Blade Tensioning Guides.
- Cast Mounted Hydraulic Downfeed for Ease of Cut.
- CSA/US Certified.
- Four 8″ Rubber Wheels for Ease of Movement.
- Heavy Casted Iron Bow and Bed.
- Hydraulic downfeed for ease of cut.
- Improved Wider Stand with Built-in Storage Cabinet and Chip Tray.
- large torque of New DC motor.
- Leveling Feed & 2 8″ Rubber Wheels for Ease of Movement.
- Multi-Position Blade Guide.
- Sealed Hardened and Ground Gear Drive.
- Side-Eccentric Shaft and ball bearing: Rear-Ball Bearing Blade Guides.
- Speed changes are now done with the turn of a knob, no need to change belts.
- Tool-less Quick Change Vise Miters to 45 degrees.
- UL Listed.
- Vertical 9″ x 12″ Worktable.
Specifications
| Model Number | HVBS712V |
| Blade Speeds (SFPM) | 88 – 270 |
| Blade Wheel Diameter (In.) | 11-3/4 |
| Motor (HP) | 7.5 Amp, 3500 RPM DC motor |
| Overall Dimensions (L x W x H) (In.) | 48 x 17 x 40 |
| Rectangle at 45 Degrees (In.) | 6-1/2 (H) x 4-1/2 (W) |
| Round at 45 Degrees (In.) | 4-1/2 |
| Round at 90 Degrees (In.) | 7 |
| Square at 45 Degrees (In.) | 4-1/2 x 4-1/2 |
| Square at 90 Degrees (In.) | 7 x 7 |
| Vise Swivels (Deg.) | 45 |
| Weight (Lbs.) | 418 |
WARNING: California Prop 65
Downloads
Manual
Warranty Information
